NISSIN Di622 for Nikon

The Nissin Di622 Digital TTL Shoe Mount Flash is designed to support digital cameras as well as film SLR cameras. With features like auto-zoom, tilt and swivel head, 6 power ratio settings, and built-in slave function, this flash is ready for any situation. This flash supports the latest versions of TTL operation, including i-TTL, and can also be used with digital cameras. Its AF assist light can help the camera to focus in low-light conditions. The vertical tilted reflector allows for effective composition of photos, and a built-in catch light reflector can be used to further improve the light composition.

Spesifikasi

Features	Canon E-TTL and Nikon i-TTL metering compatibility for precision and stability   The light distribution angle is automatically adjusted for the lens focal length. A high quality stepping motor sharply traces the lens movement with the same speed as that of the camera manufacturer's original flash model.   The flash beam covers the frame from 14mm (with a wide angle diffuser built-in) to 70mm of the digital lens. For a longer lens, the flash head reflector position stays at 70mm. It turns 90 degrees upward and 270 degrees horizontally for bounce lighting.   The Di622 has a special photo sensor built-in. Place the Di622 off camera and the flash will synchronize with the master flash placed on your camera. This wireless remote flash system is called slave flash technology and is often used for a creative lighting efficiency.   It automatically enters sleep mode when it's not in use for 5 min., and is reset with a touch of the shutter button or any button of the flash.   G.No.62(ISO 200) is obtained at the reflector position for 105mm focal length lens, and 45 at 35mm. (Reference: The guide number of the flash built in the camera is16 approx. at ISO 200)   When selecting manual power operation, choose from one of the six variable powers for the best lighting effect. The power level is provided from full power (G.No.62) down to 1/32nd power in 1.0Ev increments.   In darkness or dim light conditions, the Di622 beams a red light to create a sharp contrast to enable the camera's focus sensor to focus easily on the subject.   A firmware upgrade service is available for the Di466, which provides a service terminal to upload the latest software. A charge for the firmware update service will apply, varying depending on the area.
Flash Type	Shoe Mount
Guide Number at ISO 100	145ft / 44m at 105mm
Guide Number at ISO 200	205ft / 62m at 105mm
Angle of Coverage	84-23° (24-105mm lenses in 35mm format)   94.5° (20mm with Wide Panel supplied)
TTL Dedication	Yes
Bounce Head	Yes
Swivel Head	Yes
Zoom Head	Yes 24-105mm (flash senses focal length & adjusts)
Off Camera Terminal	No
Recycle Time	Approx. 6 sec with alkaline batteries or 4 Seconds with NiMH Batteries
Power Source	4 x AA Alkaline or NiMH Batteries (not included)
Dimensions (W x H x D)	140 x 76 x 51mm
Weight	315g
Package Contents	Shoe Stand, Flash Pouch
Warranty	1-year Limited Warranty by Authorized Distributor

Rp 1,299,000